Menüliste
Parameter
Menü: Info
Batteriespannung in Millivolt
____________________________________________________________
Menü: Antrieb
Zustand des Antriebs: gezündet oder aus
______________________________Current speed of the motor. The values are -125 for full backwards to 125 for full ahead.
______________________________Motorpegel für Maximalgeschwindigkeit vorwärts
______________________________Motorpegel für Maximalgeschwindigkeit rückwärts
______________________________Motor power level on which the vehicle starts to move
______________________________Motor power level on which the simulated second gear is activated. If the actual speed is higher as the adjusted value, the vehicle will accelerate more slowly.
______________________________Motor power level on which the simulated third gear is activated. If the actual speed is higher as the adjusted value, the vehicle will accelerate more slowly.
______________________________Acceleration value for lower speeds (1st gear). The higher the value, the faster the acceleration of the vehicle.
______________________________Acceleration value for higher speeds (2nd gear). The higher the value, the faster the acceleration of the vehiclea.
______________________________Acceleration value for higher speeds (3rd gear). The higher the value, the faster the acceleration of the vehiclea.
______________________________Minimum decceleration value for braking. It corresponds to the neutral position of the throttle stick. The higher the value, the shorter the braking distance.
______________________________Maximal decceleration value for braking. It takes effect in approx. 80% deflection of the throttle stick and corresponds to the highest simulated braking power. The higher the value, the shorter the braking distance.
______________________________Decceleration value for emergency braking. It takes effect in 100% deflection of the acceleration stick. The higher the value, the shorter the braking distance.
______________________________Wurde das Fahrzeug angehalten, bleibt es für eine kurze Zeit stehen bis es sich wieder in Bewegung setzten kann. Dieses Verhalten simuliert die Zeit, die zum Einlegen des Ganges nötig ist. Dieser Wert bestimmt die Dauer der Pause in 0.1 Sekunden (ein Wert von 10 entspricht also einer Wartezeit von 1 Sekunde)
____________________________________________________________
Menü: Funktionen
- aus
- main on
- aux on
- aus
- main on
- aux on
The state of the lights after power up.
______________________________Helligkeit des Frontlichts (Dimmer).
______________________________Helligkeit des kombinierten Rücklichtes (Dimmer). Schlusslichtfunktion.
______________________________Helligkeit des kombinierten Rücklichtes (Dimmer). Bremslichtfunktion.
______________________________Helligkeit des Zusatzlichts (Dimmer).
____________________________________________________________
Menü: System
- NiMh/NiCd 6 Zellen
- NiMh/NiCd 7 Zellen
- LiPo 2 Zellen
Battery type to determine the undervoltage shutoff.
______________________________- aus
- ein
Enables the auto neutral channel scan on power up. The current position of the stick for all channels is determined on power up. This is the default behaviour which works in almost all cases. If disabled, the current position of the radio control elements is ignored. The user has to ensure that all control elements are set to neutral position and no trim is applied. Disable it only if you really know what you do!
______________________________Delay in seconds which is applied after power up before the central unit starts to scan the channels for a valid signal. Rising the value may help in cases when the receiver isn’t able to pair with the radio fast enough.
______________________________- deaktiviert
- aktiviert
If yes, the ignition sequence will be activated as soon as the power up is finished.
____________________________________________________________
Menü: Prop
This is a list of all channels, which are linked to the receiver and which contain a valid signal. The content of the list only changes after power up. If a channel doesn’t show up as connected bit the corresponding wire is correctly attached to the receiver, check if the sender is on, the receiver is attached to the power supply or the stick/switch on the sender is set to the neutral position (+/-10%)
______________________________Shows if currently there is a valid radio connection.
______________________________Shows the value of channel 1
______________________________Shows the value of channel 3
____________________________________________________________
Menü: DDC
Acceleration control of the chains. Only active when no RC receiver connected on power on.
______________________________- Licht
- —
- Motor
Light, weapon and other control. Only active when no RC receiver connected on power on.
______________________________Control of user defined sounds. Only active when no RC receiver connected on power on.