Menu Close

ElMod M16 V2

The plug&play central unit for the Torro® M16 halftrack (2.4 GHz version). Fits perfectly in place of the original electronics.

SKU: 5713 Category:

ElMod M16 is a high integrated all-in-one plug&play electronic solution for the NEW Torro(R) M16 AA Halftrack (delivered with a digital radio equipment). It controls all functions of the vehicle and includes a polyphonic sound unit on board.

Requirements

  • A Torro(R) M16 AA halftrack. WARNING! This product is NOT compatible with the old analog Torro vehicle!
  • A four channel RC radio and receiver.
  • An appropriate high current-compliant battery (6- to 9-cells NiCd, NiMh or a 2S/3S LiPo/LiIon).

Scope of delivery

  • Electronic board with all necessary cables.
  • Cable for optional attachment to the front light.
  • ElMod USB dongle: a connection cable for a Windows® or Apple® computer for customization of all parameters of the vehicle.

Details

Drive

  • A strong and overload protected main motor driver (up to 5 Amps).
  • ElMod Physics Engine 2:
    • A driving experience of commanding a heavy vehicle by simulation of mass inert.
    • The maximum speed according to in scale speed of the 1:1 vehicle.
    • Two phase acceleration simulates the function of a gearbox: the drag decreases on higher speed.
    • Short rest after stopping simulates gear switching.
    • Three brake modes: engine brake with a long runout, full proportional brake, emergency brake.

Functions

  • Full proportional control of turret rotation.
  • Full proportional lifting and lowering of the AA guns.
  • Muzzle flash.
  • Switchable lights (rear light and optional front light).
  • Rear light also integrates brake light.
  • Diverse setting options via the free ElMod App.

    • Receiver

    • Connection to standard RC gear (requires four channels). No separate motor controller or mixers required.

    Sound

    • Integrated polyphonic sound unit:
      • Five sound channels for the simultaneous output of sounds.
      • Open file format: wav, 8 bit, 22kHz sampling rate, mono, PCM.
      • Three additional samples which can be defined by the user.
      • Speed dependent engine sound.
      • Up to seven samples for the turret rotation depending on the turret speed.
      • Alternative sounds for turret rotation when motor is switched off (operation by hand / emergency operation).
      • Distinction between cold and warm start.
      • Random selection of up to ten clips for switching engine on/off.
      • Shot sound.
      • Direct connection to an 8 Ohm speaker.

    General

    • Battery protection for NiMh/NiCd/LiPo and LiIon batteries with voltage monitoring and undervoltage protection switch-off.
    • Configurable drive parameters via USB with the included ElMod USB dongle.
    • Simple installation: all connectors of the Torro(R) vehicle fits to the ThinkTank M16 unit. Only two wires to the speaker has to be soldered.
  • Battery protection for NiMh/NiCd/LiPo and LiIon batteries with voltage monitoring and protection switch-off.
  • configurable drive parameters via PC and USB with the included ElMod USB dongle
  • Simple installation: all connectors of the Torro® vehicle fits to the ElMod M16 unit. Only two wires to the speaker has to be soldered.

    • Related products

    • ElMod 4WD

      ElMod 4WD is a modern miniature central unit for all vehicles with one drive motor and servo steering.

      This central unit is designed for lightly armed military vehicles with a wheel drive or one-motor driven half-tracks.

    • ElMod FusionX

      ElMod FusionX is the logical further development of our bestseller ElMod Fusion PRO.

      This central unit is designed for 1:16 military vehicles with full track drive or wheel steering. With the help of an expansion board, wheel-steered models with up to three steering axles can also be controlled.

    ElMod